Redigera inlägg

Ämne:
Meddelandeikon:
Verifiering:
Skriv in bokstäverna som syns på bilden
Lyssna på bokstäverna muntligt / Begär en ny bild

Skriv in bokstäverna som syns på bilden:
Which car-brand built 300 series?:
Has the 300series back-wheel drive? (yes/no):
Write the lowest number of the following (340 or 360):
The club is called 400power club or 300power club ?:
Capital of sweden?:
Volvo and this other car brand build 300 series:

kortkommandon: tryck alt+s för att skicka/posta eller alt+p för att förhandsgranska


Ämnessammanfattning

Skrivet av: svensson
« skrivet: december 16, 2008, 15:25:24  »

Looks really nice , like the pictures but i would be nice with some text so you would know what your looking at. Whats the plan for the gerbox standard M45, M90?? or something more exotik. By the way the blackend hedlights locks awsom planing on doing i my self som day.

// Johan
Skrivet av: Bergvik
« skrivet: december 14, 2008, 20:06:57  »

Looks very nice!

Will there be any upgrades at the engine?
Skrivet av: FREJ
« skrivet: december 13, 2008, 20:36:15  »

Hi again!

Very nice work you are doing on your car.  :P
I like the work with the wheel arcs! Which car model is they from?

Keep us at 300 Power updated please!  :D

Regards Frej
Skrivet av: xtrmjks
« skrivet: december 12, 2008, 21:47:13  »

New development,

















and,


Skrivet av: FREJ
« skrivet: augusti 20, 2008, 13:32:09  »

Citat från: xtrmjks skrivet augusti 20, 2008, 12:59:42
Yeah, thets it!! any ideas?

http://www.300power.com/forum/index.php?topic=2872.0

Translation:
Bodyparts in fiberglass:



Part SEK
Hood: 1400 kr
Rear fenders (wide): 2900 kr for both sides.
Right door: 2200 kr
Doorskin H+V: 800 kr st
Rear bumper :1500 kr st 
Front bumper with spoiler: 1600 kr st
Front fenders (wide): 1300 kr st
Upper frontplate: 1200 kr

Order from:
RP
Glasfiberdelar
0923-151 18 + fax
070-375 41 26
+46-92315118
RpGlasfiber Homepage:
http://home.swipnet.se/rpglasfiber/
Skrivet av: xtrmjks
« skrivet: augusti 20, 2008, 12:59:42  »

Yeah, thets it!! any ideas?
Skrivet av: FREJ
« skrivet: augusti 20, 2008, 12:10:25  »

Citat från: xtrmjks skrivet augusti 20, 2008, 11:49:07
Hello! Little update, car is now running 22psi, I have gone back to 3" side exit (clearance over rear axle), looking to link rear axle..PETER S Can I have Your e-mail? Anyone know where to get light weight panels?

Ok Nice! 1,5 Bar for us that are not familiar with psi.. That serious!

Light weight panels for what, hood, fenders and so on?
Skrivet av: xtrmjks
« skrivet: augusti 20, 2008, 11:49:07  »

Hello! Little update, car is now running 22psi, I have gone back to 3" side exit (clearance over rear axle), looking to link rear axle..PETER S Can I have Your e-mail? Anyone know where to get light weight panels?
Skrivet av: xtrmjks
« skrivet: juli 25, 2008, 08:36:55  »

Bushes are powerflex or similar, they came as part of HD ARB kit (Lot thicker!!)
winding the boost up this weekend..
Skrivet av: FREJ
« skrivet: juli 22, 2008, 23:01:42  »

Citat från: xtrmjks skrivet juli 22, 2008, 22:24:12
"What the heck is that vibra technics thing? Looks like solid but is it hydralic as the standars?

What brand is it on the sway bar and yellow bushings?

Are the IC in its final position  "

1.Competition engine mount (prototype), rubber (not fluid)
2.Whiteline ARB
3. Yes (Cosworth RS500, 60mm core)

Thanks, but the yellow bushes for ARB is that Superflex or what?
Skrivet av: xtrmjks
« skrivet: juli 22, 2008, 22:24:12  »

"What the heck is that vibra technics thing? Looks like solid but is it hydralic as the standars?

What brand is it on the sway bar and yellow bushings?

Are the IC in its final position  "

1.Competition engine mount (prototype), rubber (not fluid)
2.Whiteline ARB
3. Yes (Cosworth RS500, 60mm core)
Skrivet av: FREJ
« skrivet: juli 22, 2008, 20:10:23  »

Citat från: xtrmjks skrivet juli 22, 2008, 19:17:01
Little update..

Nice pics, but few words, here come the questions  ;D

What the heck is that vibra technics thing? Looks like solid but is it hydralic as the standars?

What brand is it on the sway bar and yellow bushings?

Are the IC in its final position  :o
Skrivet av: xtrmjks
« skrivet: juli 22, 2008, 19:17:01  »

Little update..




Skrivet av: FREJ
« skrivet: juli 08, 2008, 21:44:32  »

Citat från: xtrmjks skrivet juli 08, 2008, 17:56:29
..Thats right. These mounts are just "temporary" ones, I'm working on some proper ones..Wheels are 8x15 et 10 (escort mk1&2 Group A) with specially machined to volvo fittment ;D

Aha and AHA  ;D
Skrivet av: xtrmjks
« skrivet: juli 08, 2008, 17:56:29  »

..Thats right. These mounts are just "temporary" ones, I'm working on some proper ones..Wheels are 8x15 et 10 (escort mk1&2 Group A) with specially machined to volvo fittment ;D