Författare Ämne: 340 GLT-project 25.7 This is the end.. (läst 68955 gånger)

Mefistofeles · « **Svar #40 skrivet:** mars 30, 2006, 11:39:33 »

Where did you get the sideskirts from and how did you fit them on your car?

FREJ · « **Svar #41 skrivet:** mars 30, 2006, 18:01:05 »

Citat från: arnagath skrivet mars 30, 2006, 05:55:41

F*ck!! I have done bad things..One exhaustmanifolds bolt just snapped into cylinderhead
If something goes wrong...it goes wrong like as hell!
Well, ill try to remove it today

Is not that hard to get them out

hasse66 · « **Svar #42 skrivet:** mars 30, 2006, 22:12:39 »

hello my finland friend i hope you got the stupid bolt out follow your project wery well regards hasse and very good luck take good care of the car see you soon

arnagath · « **Svar #43 skrivet:** mars 31, 2006, 06:00:24 »

Ok.now ive got that bolt out and project can continue

Those sideskirts are from Peugeot 205 (some specialmodel, dont remember what) and those are for now fitted only with screws. I really have to put them better.

Gulbrandsen_Racing · « **Svar #44 skrivet:** april 01, 2006, 23:14:09 »

you didn't have to cut them? fix'em shorter?

360GL-87 · « **Svar #45 skrivet:** april 02, 2006, 11:24:08 »

Nice project,good luck

arnagath · « **Svar #46 skrivet:** april 04, 2006, 05:45:42 »

Citat från: Gulbrandsen_Racing skrivet april 01, 2006, 23:14:09

you didn't have to cut them? fix'em shorter?

No i didnt have to cut them or make them shorter

there was only one place what i had to cut to make it go smoother. Heres a picture http://img.photobucket.com/albums/v408/arnagath/340%20Kuvat1/b6f457d2.jpg It was top of this skirt..

Citera

Nice project,good luck

Thank you

Now I have putted B200E in 340 and it went really well there. Most of time went just to match it in engineroom. And i have to buy new gaswire because i broke old one

Luckily my girlfriends father is an sparepartsdealer so i got new gaswire from him very cheap

Next job is to put kardanaxle and transmission/rearend-paket in..

And new pics are coming as soon as possible

gronsaken · « **Svar #47 skrivet:** april 04, 2006, 10:43:58 »

Nice work!

arnagath · « **Svar #48 skrivet:** april 04, 2006, 11:16:32 »

Citat från: gronsaken skrivet april 04, 2006, 10:43:58

Nice work!

Thank you

arnagath · « **Svar #49 skrivet:** april 04, 2006, 15:52:44 »

Now pics

FREJ · « **Svar #50 skrivet:** april 04, 2006, 19:20:24 »

Nice sideskirts! Fit very well from what I can tell from the pics!

Nice with many pics too!

Keep it up!

arnagath · « **Svar #51 skrivet:** april 05, 2006, 05:53:17 »

Yes, those skirts fits perfectly

Paq · « **Svar #52 skrivet:** april 11, 2006, 17:48:49 »

nice project how is it going..

arnagath · « **Svar #53 skrivet:** april 12, 2006, 05:21:38 »

Project is going well

In friday im going to put rearend/transmission, propshaft and fueltank into the car...its going to be long weekend

arnagath · « **Svar #54 skrivet:** april 18, 2006, 05:59:02 »

Hahaa..now ive got rearend/transmission, fueltank and propshaft into my car. Ive also done some electricwork with fuelpump.
I fighted hours with propshaft until i got it in place

Damn i was tired for working 2 days and about 15-16 hours per day

Maybe it is a good thing to have a little break from this project, week or two

There are some bad things also..I broke sidemarkerswitch (that thing where are windshieldwiper and sidemarkers,behind steeringwheel) but luckily i have sparepartscar

Next jobs are tightening propshaft and changing rearaxle

FREJ · « **Svar #55 skrivet:** april 18, 2006, 10:11:23 »

A hard work and only one man to do it?

Keep it up! We like your work!

It is common that the sidemarkersswitch brokes down.. I have repaired mine once yet..

arnagath · « **Svar #56 skrivet:** april 18, 2006, 10:40:28 »

Yep..just me to do it

arnagath · « **Svar #57 skrivet:** maj 06, 2006, 15:57:08 »

Hi all!!
Now ive started engine and driven a bit. Everything works well..
But, with second gear car shakes a bit $:-\$ I think there are not much oil in transmission because when i take clutch up and put gear to neutral transmission gives noise like khhhhhhh.

I know that noise doesnt come from propshaft because it has been tightened. Noise stops if i put clutch down

FREJ · « **Svar #58 skrivet:** maj 08, 2006, 20:15:42 »

Citat från: arnagath skrivet maj 06, 2006, 15:57:08

Hi all!!
Now ive started engine and driven a bit. Everything works well..
But, with second gear car shakes a bit $:-\$ I think there are not much oil in transmission because when i take clutch up and put gear to neutral transmission gives noise like khhhhhhh.

I know that noise doesnt come from propshaft because it has been tightened. Noise stops if i put clutch down

Good to be driving again!?

Put more oil in transmission then!

hasse66 · « **Svar #59 skrivet:** maj 08, 2006, 21:48:48 »

hyi over there hows it going for you??looks like it going the rigth way anyvay i do not have been dooing enything because i got problems again now the front of the body i cant find the frontplate to the car soo you see its allways trouble on the way..good luck and see you soon

arnagath · « **Svar #60 skrivet:** maj 09, 2006, 05:57:02 »

Now ive put oil to transmission and shaking has been settled down.

Exhaustsystem also vibrates to body because it isnt right at moment..And one seam leaks also.

There is a lot of finishing but main thing is that car move, work and start well

I have to move battery from left side to rightside of the car because other wise aircleaner wont fit. And im not putting stockfilter..

Must change oils in transmission,differential and engine.
Next job is to change rearaxle and that im going to do so i can put lowering blocks after inspection

Those blocks are illegal in Finland

But im so happy to drive with my 340/360 again

arnagath · « **Svar #61 skrivet:** maj 20, 2006, 16:58:34 »

Hi again

Now i have finally changed rearaxle

It was pretty easy job..I had to change one driveshaft because it went broken. Car lowered a lot with GLT-leafsprings but still im going to put loweringblocks there.
Updates are coming

Paq · « **Svar #62 skrivet:** maj 22, 2006, 11:34:54 »

some pics woud be nice..the good thing is that your prodjekt is gooing forward.

arnagath · « **Svar #63 skrivet:** maj 23, 2006, 05:42:45 »

Yeah, I know pics would be nice and I will take pics as soon as i get digital camera in use

arnagath · « **Svar #64 skrivet:** juni 07, 2006, 10:37:46 »

Hi all!!
Now i have finally stripped off 360 GLT from parts..
Im doing front struts?!( dont know right word, but that thing where is front shocks and brakediscs etc..)
Im going to paint them. I also got new brakediscs,pads, etc for full brake-repairing

Updates and new pictures are coming

arnagath · « **Svar #65 skrivet:** juni 19, 2006, 05:37:36 »

I have to put this project to ice till end of the August because i dont have any money to continue it. And also i have to repair propshaft because its broken, it rattles and klonks.. $:-\$

So, i have to buy some car so i can go to work..
I got new job which starts 28.8 so then i get more money

But good thing is that ive got some new and fresh pictures for you guys

!! Im posting those today in the evening..

arnagath · « **Svar #66 skrivet:** juni 19, 2006, 14:33:33 »

Now i have new pictures

Chassis

More chassis

And once more chassis

Engine

Engine from other direction

Tuned headlamps

Rusty?

Rust?!

Woman from behind

Yes,its quality from Volvo!

Painted things

More painted things

Woman from behind part.2

From side

Tuning-exhaust

Frontview

Sideview

FREJ · « **Svar #67 skrivet:** juni 20, 2006, 20:52:29 »

Looks NICE!

Nice with:

- Paint inside of headlights, more pics from front side please!

- painted details, looks Great!

How did you fasten your battery on the right side of engineroom?

Cant wait until this project get of the ice

Gulbrandsen_Racing · « **Svar #68 skrivet:** juni 20, 2006, 22:26:14 »

You have stolen my idea! I Also have paintet the inside of the lamps!

arnagath · « **Svar #69 skrivet:** juni 21, 2006, 07:49:04 »

Citat från: Gulbrandsen_Racing skrivet juni 20, 2006, 22:26:14

You have stolen my idea! I Also have paintet the inside of the lamps!

There is more pictures---> http://smg.photobucket.com/albums/v408/arnagath/

Fuse · « **Svar #70 skrivet:** juni 22, 2006, 18:56:49 »

Citat från: arnagath skrivet maj 09, 2006, 05:57:02

Those blocks are illegal in Finland

There shouldn't be any law which would make them illegal. If some MOT inspector had said that, he is wrong.. We have lowering blocks in our GL and those have been in there for over 15 years and there has never been any problem in the MOT.

Gulbrandsen_Racing · « **Svar #71 skrivet:** juni 22, 2006, 22:09:14 »

what have you done with your grill ?

arnagath · « **Svar #72 skrivet:** juni 23, 2006, 12:25:44 »

Citat från: Fuse skrivet juni 22, 2006, 18:56:49

Citat från: arnagath skrivet maj 09, 2006, 05:57:02
Those blocks are illegal in Finland

There shouldn't be any law which would make them illegal. If some MOT inspector had said that, he is wrong.. We have lowering blocks in our GL and those have been in there for over 15 years and there has never been any problem in the MOT.

Ok..i havent heard that

Gulbrandsen_Racing: Its MK2 grill with no marks..I have sawed those marks off, filled holes and painted black

Fuse · « **Svar #73 skrivet:** juni 23, 2006, 14:00:37 »

Citat från: arnagath skrivet juni 23, 2006, 12:25:44

Ok..i havent heard that

This is what the law text says:

1. Muutoskatsastuksessa saadaan hyväksyä auton alustan korkeuden muuttaminen jousia säätämällä, takomalla tai vaihtamalla taikka asentamalla jousen ja akselin väliin tai jousen korin puoleiseen kiinnityspisteeseen asianmukaiset korotus- tai madalluskappaleet.

So as long those blocks are properly built (material is strong enough, good bolts etc...) there shouldn't be any problems.

This is a good site when info about legal stuff of building cars is needed http://www.finlex.fi/fi/laki/alkup/1998/19980779

arnagath · « **Svar #74 skrivet:** juli 10, 2006, 01:20:30 »

What is the right way to put propshaft into b200?
I have to remove my broken propshaft and put unbroken to it..
It broke when I removed technic from GLT and I hitted too hard to wrong place so bearings which are inside torquetube? didnt like that kind of hitting.

Now propshaft rattles and clunches while driving so it must be changed.

First time I putted propshaft, my friend told me that cluthcovers bolts must be
losened so it will bend while putting propshaft into clutchhole..

So tell me what is right way to put it so I can do it right for now :?

arnagath · « **Svar #75 skrivet:** juli 25, 2006, 17:56:36 »

I have really fed up with this car. I have too much trouble with it and not so much time..or money. I have come to this situation that this car is coming too expencive to me and i have decided to sell it

Right now i dont have enough money to restore it $:-\$

But some good news, my mothers "boyfriend" bought three days ago Volvo 245 -86 and he went to Germany with that car. Now i have decided to buy it

That car is coming for me in everyday-car until i came to Sweden in next Summer because im buying some Volvo 200 Turbo from there

FREJ · « **Svar #76 skrivet:** juli 26, 2006, 21:00:39 »

Citat från: arnagath skrivet juli 25, 2006, 17:56:36

I have really fed up with this car. I have too much trouble with it and not so much time..or money. I have come to this situation that this car is coming too expencive to me and i have decided to sell it
Right now i dont have enough money to restore it $:-\$

Bad news

Nyheter:

Författare Ämne: 340 GLT-project 25.7 This is the end.. (läst 68955 gånger)